Seach This Blog
Tag Cloud
AOI Baking BGA Burn/In(B/I) CAF Carrier Component drop/detachment Concept DFx ECM (Electrochemical migration) EDX/EDS/SEM ENIG FATP Flux FVT Gold HASL HIP(Head-In-Pillow) ICT IMC Manufacturing glossary metal dome MFI newbie NWO(Non-Wet-Open) OSP Oxidation Panel & De-panel PIH Popcorn-Effect Problem analysis & solving PTF Red Dye Penetration Reliability Short circuit Solder broken crack Soldering Solder paste Stencil Temperature Profile Troubleshooting V-cut Warpage Wave-soldering X-raySponsor
Categories
- Case study
- Connector
- Corrugated Paper
- Design
- EDX/EDS/SEM/IMC/FTIR,
- Fundamental Science
- Glue/adhesive/epoxy/underfill,
- Keypad
- Management
- Manufacture
- Moisture Sensitive
- PCB/FPC/PTF
- Personal Opinion
- Plastic
- Process
- Product Introduction
- Quality
- Reliability
- Role & Responsibility
- SMT
- Soldering
- Test/Inspection
- Uncategorized
Bookmarks
Histats
Statcounter
Email Subscription
Category Archives: SMT
Sep19
Does the Gold Thickness in ENIG PCBs Affect Component Detachment?
Does the Gold Thickness in ENIG PCBs Affect Component Detachment? Do you know how the thickness of the gold layer in ENIG surface-finished PCBs impacts soldering quality? What role does the gold layer play in PCBA soldering? How could the … Continue reading
Sep05
Using 2D X-Ray to Diagnose BGA Solder Void Issues
This is an X-ray inspection image of an MCU’s BGA soldering that failed after reflow. The owner mentioned that the BGA package was not functioning, but when pressing on the MCU, it would temporarily work again. Since Workingbear didn’t have … Continue reading
Aug29
How to Use 2D X-Ray to Identify BGA Issues like Non-Wetting, Cold Solder, and HIP or NWO
If you’re an SMT engineer, you’ve probably used an X-Ray inspection machine to check the soldering quality of BGAs. But, after looking at the BGA solder balls repeatedly, they all seem to look the same. So, how can you tell … Continue reading
Aug22
What is ENIG Surface Finished for Circuit Boards? What Are Its Advantages and Disadvantages?
ENIG (Electroless Nickel Immersion Gold), also known as immersion gold (Au), chemical Ni/Au, or soft gold, is a type of surface finished for printed circuit boards (PCBs). It is widely used in the assembly of mobile phone circuit boards and … Continue reading
Aug15
Causes of Poor Solderability on HASL Finished PCBs (Data Collection and Analysis)
Workingbear personally doesn’t recommend using HASL (Hot Air Solder Leveling) surface-finished PCBs in today’s SMT reflow processes, especially for double-sided reflow or fine-pitch components located on 2nd side. The defect rate of soldering with HASL is quite high and hard … Continue reading
