I am a Manufacturing Process Engineer (MPE)
Working for manufacturer engineering couple years. Sharing the manufacturing experience, skill, DFx, design, and information. Be care of this blog is personal share and content may not be 100% correctly.
Email RSS訂閱
Skip to content
  • Home
  • PCB Assembly
  • WorkingBear

Tag Archives: Warpage

Subject Title Views Comments
Increase solder paste volume will improve the MLCC capacitor broken? Views (3,141) (0)
Why thinner PCB will need carrier for reflow process? Views (8,079) (2)
  • Email Subscription

    FeedBurner
  • Seach This Blog

  • Tag Cloud

    AOI BGA Component broken crack De-panel DFx FPC FVT Gasket HIP(Head-In-Pillow) HotBar HSC ICT IMC Laser LCM metal dome MLCC NWO(Non-Wet-Open) Packing PET PIH PTF red-dye&pry Reliability RFI/EMI shielding-can Soldering Solder paste Stencil Temperature Profile Troubleshooting Vendor Management Warpage
  • Categories

    • Connector
    • Corrugated Paper
    • Design
    • FPC
    • Keypad
    • Manufacture
    • Material Introduction
    • PCB
    • Plastic
    • Process
    • Quality
    • Reliability
    • SMT
    • Soldering
  • Bookmarks

    • 電子製造,工作狂人(ResearchMFG)
  • Histats

  • Statcounter

  • Popular Articles

    • [11,093] Copper Defined vs. Solder Mask Defined pad de...
    • [9,596] TQRDCE Performance Expectations and Review
    • [9,475] How come the screw boss crack after mold-in s...
    • [8,079] Why thinner PCB will need carrier for reflow ...
    • [7,633] What is Step-up & Step-down Stencil? Selectiv...
    • [6,649] What is PTF(Polymer Tick Film)? PTF introduct...
    • [6,509] How EMS fabricate a PCB Assembly?
    • [5,784] Case study for the mold-in insert screw boss ...
    • [5,781] What is IMC (Intermetallic Compound) in the e...
    • [5,743] PCB rework: Selective solder mask removal by ...
  • Recent Posts

    • Why BGA soldering ball always crack(3)? IMC layer growth is a certain result to form the soldering joints
    • Why BGA soldering ball always crack(2)? The composition of PCBA bonding-force
    • Why BGA soldering ball always crack(1)? Stress > bonding-force
    • What is IMC (Intermetallic Compound) in the electronic manufacturing industry?
    • Both solder joint bridging and open solder joint happen at same BGA?
  • Recent Comments

    • WorkingBear on How come the screw boss crack after mold-in screw insert?
    • Manhkv on How come the screw boss crack after mold-in screw insert?
    • WorkingBear on Why thinner PCB will need carrier for reflow process?
    • JIMIWHA on Why thinner PCB will need carrier for reflow process?
    • WorkingBear on How EMS fabricate a PCB Assembly?
    • Aling Yin on How EMS fabricate a PCB Assembly?
    • WorkingBear on How come the screw boss crack after mold-in screw insert?
    • HC on How come the screw boss crack after mold-in screw insert?
    • WorkingBear on How come the screw boss crack after mold-in screw insert?
    • HC on How come the screw boss crack after mold-in screw insert?
  • Outbound link test

    Check out researchmfg.com
    Check out blogfuntw.com
I am a Manufacturing Process Engineer (MPE)
Proudly powered by WordPress.