I am a Manufacturing Process Engineer (MPE)
Working for manufacturer engineering couple years. Sharing the manufacturing experience, skill, DFx, design, and information. Be care of this blog is personal share and content may not be 100% correctly.
Email RSS訂閱
Skip to content
  • Home
  • PCB Assembly
  • WorkingBear

Tag Archives: Stencil

Subject Title Views Comments
How to print solder paste on PC Board and screen printing notices? Views (7,407) (0)
What is Step-up & Step-down Stencil? Selective Solder Paste Volume Increasing Solution Views (10,588) (0)
  • Welcome join the Facebook Group and discussion the SMT knowledge

  • Seach This Blog

  • Tag Cloud

    AOI BGA Component broken crack De-panel DFx FPC FVT Gasket HIP(Head-In-Pillow) HotBar HSC ICT IMC Laser LCM metal dome MLCC NWO(Non-Wet-Open) Packing PET PIH PTF red-dye&pry Reliability RFI/EMI shielding-can Soldering Solder paste Stencil Temperature Profile Troubleshooting Vendor Management Warpage
  • Sponsor

  • Categories

    • Connector
    • Corrugated Paper
    • Design
    • FPC
    • Keypad
    • Manufacture
    • Material Introduction
    • PCB
    • Plastic
    • Process
    • Quality
    • Reliability
    • SMT
    • Soldering
  • Bookmarks

    • 電子製造,工作狂人(ResearchMFG)
  • Histats

  • Statcounter

  • Email Subscription

    FeedBurner
  • Popular Articles

    • [20,667] What is IMC (Intermetallic Compound) in the e...
    • [16,680] Copper Defined vs. Solder Mask Defined pad de...
    • [15,504] TQRDCE Performance Expectations and Review
    • [14,205] How come the screw boss crack after mold-in s...
    • [10,922] Why thinner PCB will need carrier for reflow ...
    • [10,588] What is Step-up & Step-down Stencil? Selectiv...
    • [9,225] Why BGA soldering ball always crack(3)? IMC l...
    • [8,977] How EMS fabricate a PCB Assembly?
    • [8,976] Case study for the mold-in insert screw boss ...
    • [8,752] What is PTF(Polymer Tick Film)? PTF introduct...
  • Recent Posts

    • Why BGA soldering ball always crack(10)? Reduce the impact of PCB bending through the mechanism design change
    • Why BGA soldering ball always crack(9)? Increase the resistance of components to stress
    • Why BGA soldering ball always crack(8)? Increase PCB stiffness to resist stress and avoid board bending
    • Why BGA soldering ball always crack(7)? The Bonding force between solder pad of copper foil and PCB substrate
    • Why BGA soldering ball always crack(6)? The recommendation of BGA pad design from workingbear
  • Recent Comments

    • WorkingBear on Why BGA soldering ball always crack(2)? The composition of PCBA bonding-force
    • Stephen Lim on Why BGA soldering ball always crack(2)? The composition of PCBA bonding-force
    • WorkingBear on How come the screw boss crack after mold-in screw insert?
    • Manhkv on How come the screw boss crack after mold-in screw insert?
    • WorkingBear on Why thinner PCB will need carrier for reflow process?
    • JIMIWHA on Why thinner PCB will need carrier for reflow process?
    • WorkingBear on How EMS fabricate a PCB Assembly?
    • Aling Yin on How EMS fabricate a PCB Assembly?
    • WorkingBear on How come the screw boss crack after mold-in screw insert?
    • HC on How come the screw boss crack after mold-in screw insert?
  • Sponsor

  • Outbound link test

    Check out researchmfg.com
    Check out blogfuntw.com
I am a Manufacturing Process Engineer (MPE)
Proudly powered by WordPress.

Please disable your adblocker or whitelist this site!

The article is free to read and we do need the advertising sponsor.