Seach This Blog
Tag Cloud
AOI Baking BGA Burn/In(B/I) Carrier Component drop/detachment Concept DFx EDX/EDS/SEM ENIG FATP Flux FVT Gold HASL HIP(Head-In-Pillow) HotBar ICT IMC LTS Manufacturing glossary metal dome MFI newbie NWO(Non-Wet-Open) OSP Oxidation Panel & De-panel PIH Popcorn-Effect Problem analysis & solving PTF Red Dye Penetration Reliability Short circuit Solder broken crack Soldering Solder paste Stencil Temperature Profile Troubleshooting V-cut Warpage Wave-soldering X-raySponsor
Categories
- Connector
- Corrugated Paper
- Design
- EDX/EDS/SEM/IMC/FTIR,
- Fundamental Science
- Glue/adhesive/epoxy/underfill,
- Keypad
- Management
- Manufacture
- Moisture Sensitive
- PCB/FPC/PTF
- Personal Opinion
- Plastic
- Process
- Product Introduction
- Quality
- Reliability
- Role & Responsibility
- SMT
- Soldering
- Test/Inspection
- Uncategorized
Bookmarks
Histats
Statcounter
Email Subscription
Author Archives: WorkingBear
May20
Shipping carton drop/impact test condition
Do you know how vendor ensure that their products are not damaged during shipping due to handling by transporters or delivery personnel? Reputable vendors put effort into designing and selecting suitable packaging materials for shipping to ensure the quality of … Continue reading
May14
Temperature Environmental Cycle Profile
The purpose of temperature environmental test is that the good are shipped by various types of carriers and experience a wide range of storage temperatures, depending on the customer environment, hence the need for this kind of testing. Further, certain … Continue reading
May12
Humidity Temperature Cycle Profile
The humidity test is designed to determine the effects of humidity on the product and assure that the product will meet published specifications while being subjected to high humidity conditions. This is an accelerated test to uncover failure modes in … Continue reading
May05
Why Burn/In(B/I) still cannot screen out the DDR soldering fail?
We recently encountered a soldering issue with a DDR memory BGA (Ball Grid Array). The problem identified was HIP (Head-In-Pillow) — two balls with non-wetting under the BGA package were affected. To investigate, we sent someone to the field to … Continue reading
May01
Why Do Screw Bosses Crack After Mold-In Screw Inserts? Common Causes and Solutions
This story is long-standing memory, but WorkingBear is documenting it here for reference and as a learning record. One day, we received a customer complaint regarding a product with a plastic housing that had cracked. The issue was visually striking, … Continue reading
